Sybarite's feet

Handling an entire doll is always a bit difficult and there is the risk that the doll will be stained by glue, paint or some other material used in making the shoes. That is why I usually make plaster castings of the doll's feet. I was a bit hesitant to do this with the Sybarite as she is made of different material than the vinyl dolls. Finally, I decided to try making a latex mould.

The latex I had used previously had become clumpy so I had to buy more of the stuff. Unfortunately, the new brand turned out to be almost unusable. The brand of latex shown below is not suitable for making tubular moulds. It is too thick and will rip easily under the sort of stress the mould is subjected to when removing it from the doll's leg.


As I could not get better latex right now, I decided to try this stuff anyway, although I had already found out how unsuitable for the purpose it was. I felt awful spreading the stuff on the feet of the doll that had been so expensive. It probably would have been a good idea to try the latex first on some part not usually visible, for example, the scalp.


I'm happy to tell that the doll suffered no ill effects from the latex. And I even managed to get the moulds out in one piece. That was probably because they were short and the hole was quite large.


Then followed casting the plaster. I used soles I had made for Sybarite to support the moulds. They helped to keep the moulds in correct position and also to keep the shape of the arch correct.


So now I have a pair of Sybarite feet. Their surface is not perfect due to the poor quality of the latex, but they are good enough for making shoes.



Original Finnish post

Shoes for Sybarite

This is something between a wedge sole and a normal sole. The picture shows (from top to bottom) the inner and outer sole patterns, inner sole made of leather and cardboard, outer sole made of leather, pieces that come in between, and outer and inner soles for the other shoe.


The next picture shows the structure of the soles better. I got the idea for these shoes when I found those little curved pieces of wood that had been left over from some earlier project. The straight part of the sole is made of cardboard and the curved inner sole is made of four layers of cardboard.


Here are the finished shoes in the doll's feet. The red pearls are attached to that string and I had to crush a couple of pearls on each end of a strap with pliers to be able to glue the ends of the strap under the inner sole. The shape of the soles is just right and the shoes won't fall from the doll's feet, which is rare with this kind of design.



Original Finnish post