Pages

Monday, August 19, 2013

Wedges for Sybarite

I realized I haven't used many of the cast resin soles I made for Sybarite a few years ago. I found interesting plastic material I wanted to use, so I decided to use a pair of cast resin wedge soles with that. I started by painting the soles black using enamel paint (solvent-based). The extra sole in front is there to show how the soles look straight out of the mould.


The plastic for the uppers looks like this. It was rectangular originally, but I had already cut the required pieces out at this point. These were available in various colors at 2 € per 10 x 12 cm piece. I got this and another piece in silver.



Here are the pieces for the shoes before trimming the edges.


And a closeup showing the structure of the material better.


Plus another closeup showing the back.



The insole is just one layer of card stock and a piece of leather. There was no reason to use more layers of card stock as the arch in the soles is exactly the same as in Sybarite's foot, so the foot provided the desired form during assembly. After trimming the edges of the plastic pieces, I attached them using sewing thread.


Here are the straps with sewing thread attached.


And here they are in place. As you can see, they stay straight at this stage because of the way the sewing threads are attached, but gluing the ends to the sides of the soles will correct that.


The ankle part is closed with a strap made of leather.


I attached a small piece of bent wire at the end of the strap and that goes through a hole on the opposite side as shown in the photo. It is the same method I used for Monster High shoes with cork soles and it works surprisingly well despite being so simple. You just need to apply a lot of glue on the inside of the strap where the end of the wire is to make sure the wire will stay in place and won't scratch the doll's foot.


All that is missing now are the wedge soles.


The strap looked a bit out of place as it was, so I decided to glue some leftover pieces to it.


Then it was time to glue the wedge soles in place and the ends of the toe straps to the sides of the soles, so the straps would keep their correct form.



No comments:

Post a Comment