Shoes for a Living Dead Doll

The Living Dead Dolls have flat feet, so quite a lot of faking is necessary to make something with even a small heel. Here are soles consisting of two layers of cardboard, leather insole, toe part made of air-drying clay (with a little piece of leather preventing the foot from touching the colored clay), and a thick layer of cork.

The toe part of the upper is the first to be glued in place. The clay part helps stretching the leather tightly to prevent creases.

Here you can see the idea. The thick part made of cork makes it possible to make heels for the shoes, and this sort of faking also helps in making shoes that are more in scale with the doll (the doll's feet are much too short compared to the doll's height).

The rest of the upper goes in place next.

This part isn't necessary as you could just glue the outer soles in place and make stacked heels, but I wanted to try something different. So, I took pieces of the leather I used for the uppers, cut outer soles that were slightly larger than what I would have used normally, and glued them in place.

Then I sewed stitches all around, giving the impression that the soles were stitched in place.

Here's a closer look of the stitches.

After stitching, I trimmed the edges, glued the outer soles in place, trimmed those as well, and made stacked heels using the same leather as for the outer soles. Finally, I made the holes for laces and made laces using the same thread I used for stitching.

The shoes go on and off without opening the laces, so I put a little glue to the knots to prevent them from opening.

Shoe patterns on my web site

You can now find the patterns for Baha Cat boots and Schizo's shoes on my web site.

Patent leather shoes

These shoes are for a Living Dead Doll and they are made basically the same way as loafers for Anges Dreary. There are a couple of differences, though.

First, these shoes have a pronounced heel, although the insole is quite flat. This is achieved by gluing several layers of cardboard in the other end, but leaving the heel with only one or two layers.

The material is patent leather, which is thick, so the only way to make fairly invisible seams was to sew them. In Agnes' shoes, the back seam is glued, but with this material that was not an option. I treated the inside of the leather with sealer, because the Living Dead Dolls seem to be much more prone to staining than other dolls, probably because of the matte surface of these dolls.

Here are the uppers with all seams sewn. When gluing the back seam, I do that only after gluing a few tabs of the upper under the insole, but with sewing, you need to finish the back seam before any gluing.

This is how the finished shoes look like. In Agnes' shoes, there were only two layers of leather for the heel and even that caused some balance issues. Here there are four layers of fairly thick leather glued together to form the heel and the doll stays in balance just fine, because inside the shoe, the sole is flat and level.

The doll's feet are sort of wedge-shaped and the extra layers of cardboard do not make the shoes look in any way odd. In fact, the shoes look more normal than ones with entirely flat soles would look, because this structure corrects the shape of the feet.