Thursday, February 25, 2010

Old-fashioned boots

I've been planning on making some kind of old-fashioned boots for some doll. As Miss Piggy has so large feet, she was ideal for this.

First, here are the soles made of two layers of cardboard glued together to form the correct shape. The small pieces are made of air-drying modeling clay and are to be glued to the soles to get the correct form for the toe part.

I decided to use thick fabric for these boots. The edges of the fabric are again treated with Fray Stop. The part shown in the middle is actually same shape and size as I used for the red boots.

The heels are plaster castings. This is the shape of heel found in many old shoes. It probably has something to do with the structure of the heel as old shoes often have stacked heels and those tend to be quite thick. Of course in this case, the shape could be anything, although plaster isn't practical for very thin parts. As these heels will be covered in fabric, plaster is fine for them.

Here you can see one part of the upper glued in place and the back seam of the two other parts glued as well. The heel is covered using same fabric, glued in place using PVA glue.

Just testing how the heel will look once in place.

The hardest part is done now. When using the same fabric on the heels, make sure the parts of the upper turned under the sole cover the edges properly as the outer sole won't extend all the way back, but will stop in front of the heel.

This time I didn't use eyelets for the laces, but pieces of trimming that double as decorations.

Here are a couple of pictures of the finished boots.

No comments:

Post a Comment